跳转到主内容

跳到步骤#12

Arthur Shi编辑

编辑已通过 由 Arthur Shi

之前
之后
不变

步骤行

[title] Install the bottom adhesives
-[* icon_note] The next few steps show how to install the bottom right adhesive strip, which must be precisely aligned in order to maintain microphone functionality.
+[* icon_note] The next few steps will show you how to install the bottom right adhesive strip (strip 25), which must be precisely aligned for the microphone to function properly.
[* icon_caution] Read through this step and the next four steps before you attempt the procedure.
-[* black] Grasp the red pull tab on the ***bottom right adhesive strip*** and pull to remove about 2 inches (5 cm) of white backing from the strip.
+[* black] Grasp the red pull tab on strip 25 and pull to remove about 2 inches (5 cm) of white backing from the strip.