跳转到主内容

跳到步骤#4

Arthur Shi编辑

编辑已通过 由 Arthur Shi

之前
之后
不变

步骤行

[title] Lay out the adhesive strips
[* black] Lay out the adhesives strips beforehand so you won't accidentally install a strip in the wrong place:
[* red] Strip 22 on the top left
[* orange] Strip 23 on the top right
[* yellow] Strip 21 on the right vertical
- [* green] Strip 25 on the bottom right, dark side up
- [* light_blue] Strip 26 on the bottom left, dark side up
+ [* green] Strip 25 on the bottom right, dark side facing up
+ [* light_blue] Strip 26 on the bottom left, dark side facing up
[* blue] Strip 16 on the left vertical