跳转到主内容

跳到步骤#22

Arthur Shi编辑

编辑已通过 由 Arthur Shi

之前
之后
不变

步骤行

[title] Seal the iMac
[* icon_caution] Verify that your iMac is turned off and unplugged from power before you continue.
[* black] After confirming that your iMac functions properly, disconnect the display cables and carefully lean the display forward.
-[* black] Remove the film from the two bottom strips by reaching in from above and pulling the blue tabs straight up from the bottom edge of the display.
+[* black] Remove the film from the two bottom strips by reaching in from above with a pair of tweezers and pulling the blue tabs straight up from the bottom edge of the display.