跳转到主内容

跳到这一步

Arthur Shi编辑

编辑已通过 由 Arthur Shi

之前
之后
不变

步骤行

+[* icon_note] The two remaining strips (14 and 15) do not have guide holes and are more difficult to place than the previous ones. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement.
+[* black] Grasp the red film pull tab on the 14 adhesive strip and pull to remove the backing from the strip.
+[* black] Align the strip on the bottom edge of the rear enclosure, directly to the right of the middle screw on that edge.
+[* black] Run your finger along the length of the adhesive strip to ensure it is straight and unwrinkled, pressing down as you go to adhere the strip to the iMac.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加