跳转到主内容

跳到步骤#11

Arthur Shi编辑

编辑已通过 由 Arthur Shi

之前
之后
不变

步骤行

+[* black] Work your way around the perimeter of the iMac, adding three more adhesive strips in the same manner.
+[* black] Working counter-clockwise from strip 13, place:
+ [* red] strip 12 on the top right
+ [* orange] strip 11 on the top left
+ [* yellow] strip 16 on the left vertical
+ [* icon_note] These three strips have a hole at each end—always use the smaller hole for alignment for more precise placement.
+[* green] On the iMac Intel 27" Retina 5K Display, strip 12's blue tabs will not line up with the top antenna in the same way as the regular model. This is perfectly acceptable and won't impact the performance of the strips or antenna.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加