跳转到主内容

跳到步骤#11

Arthur Shi编辑

编辑已通过 由 Arthur Shi

之前
之后
不变

步骤行

-[* black] Work your way around the perimeter of the iMac, adding three more adhesive strips in the same manner.
-[* black] Working counter-clockwise from the right strip, place:
+[* black] Work your way counter-clockwise around the perimeter of the iMac, adding three more adhesive strips in the same manner:
[* red] The top right strip
[* orange] The top left strip
[* yellow] The left vertical strip
[* icon_note] These three strips have a hole at each end—always use the smaller hole for alignment for more precise placement.
-[* green] On the iMac Intel 27" Retina 5K Display, strip 12's blue tabs will not line up with the top antenna in the same way as the regular model. This is perfectly acceptable and won't impact the performance of the strips or antenna.
+[* green] On the iMac Intel 27" Retina 5K Display, the top-right strip's blue tabs will not line up with the top antenna in the same way as the regular model. This is perfectly acceptable and won't impact the performance of the strips or antenna.

图片1

旧版本

新版本