跳转到主内容

跳到步骤#3

Arthur Shi编辑

编辑已通过 由 Arthur Shi

之前
之后
不变

步骤行

+[title] Remove the old adhesive
[* icon_caution] Before you start placing strips, remove all of the old adhesive from around the perimeter of the rear enclosure.
[* black] If you are re-using your existing display, you must also remove the old adhesive from the back of the display.
[* black] Peel off the old strips of adhesive using tweezers or your fingers. Start at the bottom and peel ''upward'' towards the top of the device.
[* black] After all the old adhesive is removed, carefully clean the area under the adhesive with 90% (or greater) isopropyl alcohol and a lint-free cloth. Wipe in one direction, not back and forth.
[* icon_caution] ***Don't skip this step***, or your new adhesive strips may not bond properly, and the display may fall out of your iMac.