跳到步骤#12
由 Adam O'Camb — 编辑
编辑已通过 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
- | [* black] Insert wisdom here. |
---|---|
+ | [title] Remove the throttle lever |
+ | [* icon_note] The throttle lever is held in place by a flared pin. You will need to replace this pin with a new one, and re-flare it, during reassembly. |
+ | [* black] Use pliers to bend the flared end of the pin inward to straighten it. |