跳转到主内容

跳到步骤#2

Miroslav Djuric编辑

等待批准

已删除
已添加
不变

步骤行

[* yellow] Remove the ruberrubber rectangular cover in order to access the right side screw on the Palm Treo 680 with a spudger.
[* red] Then removeRemove the 0.266 inch screw with the same T6 Torx Screwdriver.
[* yellow] Remove the ruberrubber rectangular cover in order to access the right side screw on the Palm Treo 680 with a spudger.
[* red] Then removeRemove the 0.266 inch screw with the same T6 Torx Screwdriver.
[* icon_note] If there is a red Palm sticker covering the screw, just puncture it to unscrew the screw.
[* black] Place the screw in the same bag as the screws from step 3.