跳转到主内容

跳到步骤#2

Celeste Conroy编辑

编辑已通过 由 Celeste Conroy

已删除
已添加
不变

步骤行

[* yellow] InRemove the rubber rectangular cover with a spudger in order to access the top right side screw on the device, remove the rubber rectangular cover with a spudgerdevice.
[* red] RemoveUnscrew the 0.266 inch screw with the T6 Torx Screwdriver.
[* yellow] InRemove the rubber rectangular cover with a spudger in order to access the top right side screw on the device, remove the rubber rectangular cover with a spudgerdevice.
[* red] RemoveUnscrew the 0.266 inch screw with the T6 Torx Screwdriver.
[* icon_note] If there is a red Palm sticker covering the screw, just puncture it to access the screw.