跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#4

Sam Goldheart编辑

编辑已通过 由 Sam Goldheart

之前
之后
不变

步骤行

[* black] Lift the hard drive/IR sensor cable assembly out of the upper case.
[* icon_note] If your replacement part does not come with the hard drive bracket and indicator light, you will need to pull those off of the part you are removing and install them on the new part.
[* icon_reminder] Your replacement part may come with several adhesive foam bumpers. These are to ensure a snug fit of both bracket and hard drive. Apply only as needed.