跳到步骤＃5
由 Jon Amireh — 编辑
编辑已通过 由 Jon Amireh
- 之前
- 之后
- 不变
步骤行
| [* red] Remove the 6 screws (M2-3mm) indicated in the picture. Place these screws in a labeled container as they are different than the bezel screws. |
| [* red] Remove the 6 screws (M2-3mm) indicated in the picture. Place these screws in a labeled container as they are different than the bezel screws. |
| [* icon_note] If you are following this portion of the guide as a part of replacing the touchpad or the speaker, this step is NOT needed. |