跳转到主内容

跳到步骤#5

Jeremy编辑

编辑已通过 由 Jeremy

已删除
已添加
不变

步骤行

[* bluered] Remove the 8 screws (M2-3mm) indicated in the picture. Place these screws in a labeled container as they are different than the bezel screws.
[* redorange] Do not remove these screws
[* bluered] Remove the 8 screws (M2-3mm) indicated in the picture. Place these screws in a labeled container as they are different than the bezel screws.
[* redorange] Do not remove these screws
[* icon_note] If you are following this portion of the guide as a part of replacing the touchpad or the speaker, this step is NOT needed.

图片1

旧版本

新版本