跳转到主内容

跳到步骤#5

knipwim编辑

编辑已通过 由 knipwim

之前
之后
不变

步骤行

+[title] charging
+[* black] Connect the ventilator back to the AC power.
+[* red] Make sure the battery is properly installed by verifying that the yellow Battery (charged) LED on the front panel flashes. The flashing LED indicates the battery is being charged.
+[* icon_note] A new battery must be charged for at least 5 hours before being placed into service.
+[* icon_caution] Following battery installation, if a ***Check Vent*** or ***Vent Inoperative*** alarm occurs during the preoperational check, discontinue use of the ventilator immediately and contact Respironics. The ***Vent Inoperative*** alarm occurs if AC power is disconnected and a battery is not installed, or if the battery is fully discharged.