跳转到主内容

跳到步骤#3

knipwim编辑

编辑已通过 由 knipwim

之前
之后
不变

步骤行

+[title] replace battery
+[* green] Disconnect the battery cable by pinching the battery connector and pulling it out.
+[* black] Remove the battery and bracket.
+[* black] Holding the battery so that the vent hole faces up and the Philips logo faces out, thread the battery cable through the battery bracket. Position and place the battery inside the battery compartment.
+[* green] Pinching the end of the battery connector, plug it in so that it locks in place.

图片1

没有之前的图片

已添加