跳转到主内容

跳到步骤#4

Baschtl编辑

编辑已通过 由 Baschtl

已删除
已添加
不变

步骤行

[* black] Take the small Phillips screwdriver.
[* red] Tighten the small screw that can be found near the top of the device internals
[* icon_note] '''Pro tip''': I experienced that the screw comes loose after just a few days if you do not take further actions.
[* black] Hence, unscrew the screw completely and put some superglue at the end of it. Than tighten it again. This prevents the screw to get loose due to the vibrations.