跳转到主内容

跳到步骤#2

Baschtl编辑

编辑已通过 由 Baschtl

已删除
已添加
不变

步骤行

[title] Open the enclosure
[* black] Take the flathead screwdriver.
[* red] Insert it into the slot located at the bottom of the handle and turn counterclockwise to release the bottom cap.
[* icon_caution] Be careful with this as the plastic is not very solid. Deforming the material could result in issues when placing the device onto the charging station.
[* black] Hold the handle upside down, and push down on the shaft to release the internal components of the handle.