跳转到主内容

跳到步骤#7

Michael Biancardi编辑

编辑已通过 由 Michael Biancardi

之前
之后
不变

步骤行

-[* black] Begin installing the outer screws (indicated in red in the third picture). Then install the inner screws (indicated in orange).
+[* red] Begin installing the outer screws (indicated in red in the third picture).
+[* orange] Then install the inner screws (indicated in orange).
[* icon_note] Note: the dimensions of the screws that come with the kit are 31 mm x 35 mm x 27 mm.
[* icon_caution] Do not tighten the screws until all of them are in place. Once all eight screws are in, go back and tighten each one. This is done so that the new tuning keys can be properly aligned.