跳转到主内容

跳到步骤#7

Michael Biancardi编辑

编辑已通过 由 Michael Biancardi

之前
之后
不变

步骤行

-[* black] Screw the tuning keys to the guitar head.
-[* icon_note] Start with the outer screws (indicated in red in the third picture) before inserting the inner screws (indicated in orange) so that the new tuning keys can be properly aligned.
+[* black] Begin installing the outer screws (indicated in red in the third picture). Then install the inner screws (indicated in orange).
[* icon_note] Note: the dimensions of the screws that come with the kit are 31 mm x 35 mm x 27 mm.
-[* icon_caution] Do not tighten the screws until all of them are in place. Once all eight screws are in, go back and tighten each one.
+[* icon_caution] Do not tighten the screws until all of them are in place. Once all eight screws are in, go back and tighten each one. This is done so that the new tuning keys can be properly aligned.