跳转到主内容

跳到步骤#4

Krishan Patel编辑

编辑已通过 由 Krishan Patel

之前
之后
不变

步骤行

+[title] Re-solder the poor contact(s)
[* black] Reflow and add some fresh solder to the bad pin with a fine tipped soldering iron.
[* icon_note] Do not over heat the area but make sure the original solder has started to reflow.
[* black] Here you can see my bad pin with a new fillet of solder.
[* green] Screw the case back on your mac!