跳转到主内容

跳到步骤#3

Krishan Patel编辑

编辑已通过 由 Krishan Patel

之前
之后
不变

步骤行

-[* black] Using a piece of wire or a pin, you can test each pin.
-[* black] Be careful not to bridge any pins and pay close attention to pins which look like they have bad solder joints.
+[* black] Using a piece of wire or a pin, you can test each pin. You are trying to touch each pin to its surrounding solder connection.
+[* icon_caution] Be careful not to bridge any pins and pay close attention to pins which look like they have bad solder joints.
+[* black] Pause on each pin and see if the sound starts playing when you probe each one.
+[* icon_note] You may need to probe more than one pin at the same time. Look for pins that have a visibly poor solder joint.
+[* icon_caution] Once you identify the badly soldered pin(s) turn off your machine.