跳转到主内容

跳到步骤#2

Krishan Patel编辑

编辑已通过 由 Krishan Patel

之前
之后
不变

步骤行

-[* black] The headphone jack is shown with a red ring.
-[* black] Apply gentle pressure to the 2 areas marked in blue with your finger.
-[* black] This pressure slightly flexes the area and may cause poorly soldered pins to re contact.
-[* black] If the sound returns and the red light turns off the issue is likely caused by a poor solder connection on the board.
+[* red] The headphone jack is shown with a red ring.
+[* blue] Apply gentle pressure to the 2 areas marked in blue with your finger.
+ [* icon_note] This pressure slightly flexes the area and may cause poorly soldered pins to re contact.
+[* black] If the sound returns and the red light turns off the issue is likely caused by a poor solder connection on the board. If not this fix may not work for you.