跳转到主内容

跳到步骤#1

Ian Meeder编辑

编辑已通过 由 Ian Meeder

已删除
已添加
不变

步骤行

[* red] Now that you have separated the two main parts of your Kindle, you will now begin to take off the metal casing. You will be working on the left part of the Kindle shown on the screen.
[* black] Before starting, make sure to locate a secure place to place the screws so that none will be lost in the process.
[* orange] Begin by locating the 16sixteen 2.7mm screws that you will need to unscrew in order to take off the metal casing. You will find a screw on each of the corners and along the edges, 4 screws bunched near the charger input, and finally the rest scattered in the middle of the metal casing itself.
[* black] Finish unscrewing all 16sixteen 2.7mm screws.
[* orange] Begin by locating the 16sixteen 2.7mm screws that you will need to unscrew in order to take off the metal casing. You will find a screw on each of the corners and along the edges, 4 screws bunched near the charger input, and finally the rest scattered in the middle of the metal casing itself.
[* black] Finish unscrewing all 16sixteen 2.7mm screws.

图片2

旧版本

新版本