跳转到主内容

跳到步骤#6

Miroslav Djuric编辑

编辑已通过 由 Miroslav Djuric

之前
之后
不变

步骤行

-[* red] Strapped to the back of the LCD is a small PCB housing a Wacom W9002 chip, that we can only assume is responsible for driving the Wacom Electro Magnetic Resonance (EMR) digitizer system.
+[* red] Strapped to the back of the LCD is a small PCB housing a Wacom W9002 chip, that we assume is responsible for driving the Wacom Electro Magnetic Resonance (EMR) digitizer system.
[* black] In this system, developed by Wacom, a grid of wires embedded in the screen generate magnetic fields that induce current in a coil in the tip of the tablet pen, both powering it and indicating its position over the grid. The pen then wirelessly returns that location data, along with pressure and click information.
-[* orange] We also took a look at the LCD display driver, a Samsung WiseView N52A2NE, similar to the driver [http://www.ifixit.com/blog/2011/07/19/ipad-2s-new-display-driver-ic/|found in the iPad 2].
+[* orange] We also found the LCD display driver, a Samsung WiseView N52A2NE, similar to the driver [http://www.ifixit.com/blog/2011/07/19/ipad-2s-new-display-driver-ic/|found in the iPad 2].
+ [* black] Here's the [http://guide-images.ifixit.net/igi/XJhLVKomGuoqyBBL|ginormous version] of the LCD display board so you can view it in all its glory.