跳转到主内容

跳到步骤#2

Chris Pittner编辑

编辑已通过 由 Chris Pittner

已删除
已添加
不变

步骤行

[* yellow] Locate the gold nut at the base of the output Jack.
[* black] Use the wrench to loosen the nut.icon_caution] Do not remove the nut completely, but leave it about halfway down the output jack. We only want to move the prongs slightly away from all of the wires to allow for easier soldering.
[* black] Use the wrench to loosen the nut.
[* black] Use the wrench to loosen the nut.icon_caution] Do not remove the nut completely, but leave it about halfway down the output jack. We only want to move the prongs slightly away from all of the wires to allow for easier soldering.
[* black] Use the wrench to loosen the nut.