跳转到主内容

跳到步骤#1

Chris Pittner编辑

编辑已通过 由 Chris Pittner

已删除
已添加
不变

步骤行

[* yellow] Moveblack] Lift the green printed circuit board to move some of the wires aside and locate
[* yellow] Locate
the Output Jackoutput jack at the base of the cavity.
[* green] Move wires away from the end of the output jack to expose the three pins.
[* yellow] Moveblack] Lift the green printed circuit board to move some of the wires aside and locate
[* yellow] Locate
the Output Jackoutput jack at the base of the cavity.
[* green] Move wires away from the end of the output jack to expose the three pins.

图片1

旧版本

新版本

图片2

旧版本

新版本

图片3

旧版本

新版本