跳到步骤＃1
由 Caleb Hayhurst — 编辑
编辑已通过 由 Caleb Hayhurst
- 之前
- 之后
- 不变
步骤行
| - | [* black] Once the battery has been removed, remove all the ribbon cables attached to the motherboard. You will need to flip the latches on and pull out the cable. |
|---|---|
| - | [* black] There are 7 ribbon cables that need to be removed. They all look similar to the one being pictured. |
| + | [* black] There are 7 ribbon cables that need to be removed as shown in the picture. Use a pair of tweezers to flip the latches up and pull the ribbon cable out. |