跳转到主内容

跳到步骤#5

Miroslav Djuric编辑

等待批准

已删除
已添加
不变

步骤行

[* black] With the four screws unscrewedunscrewed, the UMD Drive can be removed. Gently lift the drive from its housing.
[* icon_caution] Make sure as to not damage the UMD ribbon cable (toconnecting it to the logic board) as you remove the drive.
[* black] With the four screws unscrewedunscrewed, the UMD Drive can be removed. Gently lift the drive from its housing.
[* icon_caution] Make sure as to not damage the UMD ribbon cable (toconnecting it to the logic board) as you remove the drive.
[* icon_note] This may be a good time to clean the laser head or any of the components inside the UMD Drive.