跳转到主内容

Changes to Step #4

Edit by Miroslav Djuric

等待批准

已删除
已添加
不变

步骤行

[* blackorange] With the UMD door off, locate and remove the four 4mm Phillips screws that hold in the UMD Drive:
[* orange] Four 4 mm Phillips
Drive in place.
[* icon_reminder] If you have not disconnected the UMD ribbon cable, do so now, as to not damage it when removing the drive.
[* blackorange] With the UMD door off, locate and remove the four 4mm Phillips screws that hold in the UMD Drive:
[* orange] Four 4 mm Phillips
Drive in place.
[* icon_reminder] If you have not disconnected the UMD ribbon cable, do so now, as to not damage it when removing the drive.
[* icon_reminder] If you have not disconnected the UMD ribbon cable do so now, as to not damage it when removing the drive.