Skip to main content

Changes to Step #4

Edit by pepe32290

等待批准

Deleted
Added
Unchanged

Step Lines

[* black] With the UMD door off, locate and remove the four screws that hold in the UMD Drive:
[* black] With the UMD door off, locate and remove the four screws that hold in the UMD Drive:
[* orange] Four 4 mm Phillips
[* icon_caution] Be careful not to damageicon_reminder] If you have not disconnected the UMD ribbon cable do so now, as to the logic board as you removenot damage it when removing the drive.
[* icon_caution] Be careful not to damageicon_reminder] If you have not disconnected the UMD ribbon cable do so now, as to the logic board as you removenot damage it when removing the drive.