跳转到主内容

跳到步骤#4

espinks编辑

等待批准

已删除
已添加
不变

步骤行

[* black] With the UMD door off, locate and remove the four screws that hold in the UMD Drive in.
[* black] Unscrew them, being careful not to strip them
Drive:
[* black] With the UMD door off, locate and remove the four screws that hold in the UMD Drive in.
[* black] Unscrew them, being careful not to strip them
Drive:
[* orange] Four 4 mm Phillips
[* icon_caution] Before unscrewingunscrewing, make sure that you disconnected the UMD ribbon cable from the logic boardboard, as to not damage it.
[* icon_caution] Before unscrewingunscrewing, make sure that you disconnected the UMD ribbon cable from the logic boardboard, as to not damage it.

图片1

旧版本

新版本

图片2

旧版本

新版本