跳到步骤＃1
由 Isaiah Allard — 编辑
编辑已通过 由 Isaiah Allard
- 之前
- 之后
- 不变
步骤行
| - | [* red] Using a Phillips #0 screwdriver, |
|---|---|
| + | [* red] Using a Phillips #0 screwdriver, loosen the three 3.0 mm heat sink screws. |
| [* black] Remove the Heat Sink. | |
| [* icon_reminder] When reinstalling the heat sink, be sure to clean both contact surfaces with isopropyl alcohol and [guide|744|reapply thermal paste]. |