跳转到主内容

跳到步骤#1

Jesus Perez编辑

编辑已通过 由 Jesus Perez

之前
之后
不变

步骤行

-[* black] Having the plastic opening tool in hand, you can now start to remove the screen portion of the kindle from the rest.
-[* icon_caution] You will be prying the screen half of the kindle from the back half by using the plastic opening tool ***on the back*** of your kindle (not on the same side as the screen) as shown in the step 1 images.
-[* red] A good place to start prying is near, but not in, the headphone jack. Insert a medium to large plastic opening tool into the crevice, located on the back, between the two portions of the kindle.
-[* icon_note] Pry each side equally so that the kindle does not bend in the process.
-[* blue] Push the top of plastic opening tool away from you so that the hook end of the tool can separate the two halves of the kindle. Repeat this several times until you are able to see a noticeable gap between the halves.
-[* black] As the gap between the halves of the kindle continue to grow, repeat the above step further along the sides of the kindle until you are able to completely separate the screen half from the other.
+[* black] Having the plastic opening tool in hand, you can now start to remove the screen portion of your kindle from the rest.
+[* icon_caution] You will be prying the screen half of your kindle from the back half by using the plastic opening tool ***on the back*** of your kindle (not on the same side as the screen) as shown in the step 1 images.
+[* red] A good place to start prying is near, but not in, the headphone jack. Insert a medium to large plastic opening tool into the crevice, located on the back, between the two portions of your kindle.
+[* icon_note] For most effective prying, have the arrow on the underside of the plastic opening tool be closer to the back of the kindle than to the screen.
+[* blue] Push the top of plastic opening tool away from you so that the hook end of the tool can separate the two halves of your kindle. Repeat this several times until you are able to see a noticeable gap between the halves.
+[* icon_note] Pry each side equally so that your kindle does not bend in the process.
+[* black] As the gap between the halves of your kindle continue to grow, repeat the above step further along the sides until you are able to completely separate the screen half from the other.
[* icon_note] Before pulling the two halves apart, proceed to step 2 to successfully detach them from one another.