跳转到主内容

跳到步骤#1

Ron Davis编辑

编辑已通过 由 Ron Davis

之前
之后
不变

步骤行

-[* black] Insert large plastic opening tool next to the Kindle's headphone jack.
+[* black] Insert a large plastic opening tool next to the Kindle's headphone jack.
[* icon_note] Make sure the arrow on the plastic opening tool is facing the back of the Kindle.
-[* black] Move the plastic opening tool equally around the Kindle so that the Kindle does not bend in half.
-[* black] Make sure to remove the lock key before separating the back and front halves.
-[* black] Once the two halves have separated, leave the flex cables attached.
+[* black] Move the plastic opening tool evenly around the Kindle.
+[* icon_caution] Be careful not to completely separate the rear cover. There are two delicate flex cables that connect the display to the motherboard.
+[* icon_note] Remove the lock key before separating the back and front halves.