跳转到主内容

跳到步骤#4

Andrew Bookholt编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Insert wisdom herethe flat end of a spudger into the gap between the rear display bezel and the clutch cover.
[* black] Twist the spudger to separate the lower edge of the rear display bezel from the clutch cover.
[* black] Work along the lower edge of the rear bezel until it is evenly separated from the clutch cover
.
[* black] Insert wisdom herethe flat end of a spudger into the gap between the rear display bezel and the clutch cover.
[* black] Twist the spudger to separate the lower edge of the rear display bezel from the clutch cover.
[* black] Work along the lower edge of the rear bezel until it is evenly separated from the clutch cover
.