跳到步骤＃3
由 Eric Donaldson — 编辑
编辑已通过 由 Eric Donaldson
- 之前
- 之后
- 不变
步骤行
| [* red] Use the black spudger to remove the last remaining wire ribbon plug on the motherboard, located on the side facing the plastic frame. | |
| - | [* orange] Remove the #00 Phillips head screw on the lower left corner of the motherboard. The motherboard should now be free from the plastic frame. |
| + | [* orange] Remove the 2mm #00 Phillips head screw on the lower left corner of the motherboard. The motherboard should now be free from the plastic frame. |