跳转到主内容

跳到步骤#2

Ryan Kaupellis编辑

编辑已通过 由 Nick

之前
之后
不变

步骤行

-[* black] Check the power-board. If their any blown-up capacitors, you should replace it.
+[* black] Check the power-board. If there are any blown-up capacitors, you should replace them.
[* black] For removing the capacitors, remove the board, take a soldering bolt and heat the solder points at the back of the board.
[* black] Insert the replacement capacitors and solder it. Check the poles!