跳转到主内容

跳到步骤#2

eugl18编辑

编辑已通过 由 eugl18

之前
之后
不变

步骤行

-[* black] Check the power-board. If their any blown-up capacitors, you shoud replace it.
+[* black] Check the power-board. If their any blown-up capacitors, you should replace it.
[* black] For removing the capacitors, remove the board, take a soldering bolt and heat the solder points at the back of the board.
[* black] Insert the replacement capacitors and solder it. Check the poles!