跳到步骤＃3
由 Adam O'Camb — 编辑
编辑已通过 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
| + | [* black] Carefully place a suction cup halfway up the heated side. |
|---|---|
| + | [* black] Be sure the cup is completely flat on the screen to get a tight seal. |
| + | [* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case. |
| + | [* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加