跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#7

JaosnT编辑

等待批准

之前
之后
不变

步骤行

[* black] Now you will remove all other connectors from the outer parts of the mainboard. as marked in redthe Red Rectangles. Gently, pull them out of their connection place.
[* black] TheYou will find that the two markedconnectors labeled in with a yellow have nothingrectangle are not connected to themanything leading me to believe that this Boardmainboard may be used onwith other Models.model projectors as well.
[* black] Remove the five screws marked in the red Circles from the mainboard.
[* black] In the Third image you will find the LCD Ribbon Cable on the Center of the Board. You will remove these by gently pulling up on either side of the tiny brown connectors attching them to the board
[* black] Now you will remove all other connectors from the outer parts of the mainboard. as marked in redthe Red Rectangles. Gently, pull them out of their connection place.
[* black] TheYou will find that the two markedconnectors labeled in with a yellow have nothingrectangle are not connected to themanything leading me to believe that this Boardmainboard may be used onwith other Models.model projectors as well.
[* black] Remove the five screws marked in the red Circles from the mainboard.
[* black] In the Third image you will find the LCD Ribbon Cable on the Center of the Board. You will remove these by gently pulling up on either side of the tiny brown connectors attching them to the board

图片1

旧版本

新版本

图片3

没有之前的图片

已添加