跳转到主内容

跳到步骤#11

Tobias Isakeit编辑

编辑已通过 由 Tobias Isakeit

之前
之后
不变

步骤行

[* black] Set the logic board back down, leaving the spudger underneath to prevent the adhesive from re-sealing.
-[* icon_note] In the following steps, you'll use a liquid solvent (such as iFixit Adhesive Remover or high-concentration isopropyl alcohol) to weaken the adhesive under the battery. The location of the adhered areas and the Smart Connector flex cable underneath the battery are shown here:
+[* icon_note] In the following steps, you'll use a liquid solvent (such as iFixit Adhesive Remover or high-concentration isopropyl alcohol) to weaken the adhesive under the battery. The location of the adhered areas and the Smart Connector flex cable underneath the battery are shown in the last two images:
[* red] Adhesive
[* orange] Smart Connector cable