跳转到主内容

跳到步骤#11

Dominik Schnabelrauch编辑

编辑已通过 由 Dominik Schnabelrauch

之前
之后
不变

步骤行

+[* black] Set the logic board back down, leaving the spudger underneath to prevent the adhesive from re-sealing.
+[* icon_note] In the following steps, you'll use a liquid solvent (such as iFixit Adhesive Remover or high-concentration isopropyl alcohol) to weaken the adhesive under the battery. The location of the adhered areas and the Smart Connector flex cable underneath the battery are shown here:
+ [* red] Adhesive
+ [* orange] Smart Connector cable

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加