跳转到主内容

跳到步骤#8

Jeff Suovanen编辑

编辑已通过 由 Jeff Suovanen

之前
之后
不变

步骤行

-[* icon_caution] The adhesive that holds down the logic board is very strong. It's possible to remove the board by only using solvent ''or'' an iOpener, however to prevent bending and damage during the removal procedure we recommend using both.
+[* icon_note] The adhesive that holds down the logic board is very strong. To remove the board, you must first weaken the adhesive using either a solvent, or heat.
+ [* icon_caution] ***Many glue solvents (such as isopropyl alcohol) are flammable***, so don't mix these methods.
[* black] Apply some solvent in a seamless movement along both edges of the logic board. Allow it to penetrate the adhesive for several minutes.
-[* black] Meanwhile [guide|25705|prepare an iOpener|new_window=true] and apply it for at least 2 minutes on the logic board to loosen the adhesive beneath.

图片3

已删除