跳转到主内容

跳到步骤#8

Tobias Isakeit编辑

编辑已通过 由 Tobias Isakeit

之前
之后
不变

步骤行

-[* icon_caution] The adhesive that holds down the logic board is very strong. It's possible to remove the board by only using solvent ''or'' an iOpener, however to prevent bending and damage during the removal procedure we recommend both.
-[* black] Apply some solvent in a seamless movement along the long edges of the logic board. Allow it to penetrate the adhesive for several minutes.
-[* black] [guide|25705|Prepare an iOpener|new_window=true] and apply it to the logic board to loosen the adhesive beneath. Apply the iOpener for at least two minutes.
+[* icon_caution] The adhesive that holds down the logic board is very strong. It's possible to remove the board by only using solvent ''or'' an iOpener, however to prevent bending and damage during the removal procedure we recommend using both.
+[* black] Apply some solvent in a seamless movement along both edges of the logic board. Allow it to penetrate the adhesive for several minutes.
+[* black] Meanwhile [guide|25705|prepare an iOpener|new_window=true] and apply it for at least 2 minutes on the logic board to loosen the adhesive beneath.

图片1

旧版本

新版本

图片2

旧版本

新版本