跳转到主内容

跳到步骤#8

Dominik Schnabelrauch编辑

编辑已通过 由 Dominik Schnabelrauch

之前
之后
不变

步骤行

-[* black] Apply a [guide|25705|heated iOpener|new_window=true] to the logic board to loosen the adhesive beneath. Apply the iOpener for at least two minutes.
+[* icon_caution] The adhesive that holds down the logic board is very strong. It's possible to remove the board by only using solvent ''or'' an iOpener, however to prevent bending and damage during the removal procedure we recommend both.
+[* black] Apply some solvent in a seamless movement along the long edges of the logic board. Allow it to penetrate the adhesive for several minutes.
+[* black] [guide|25705|Prepare an iOpener|new_window=true] and apply it to the logic board to loosen the adhesive beneath. Apply the iOpener for at least two minutes.

图片1

旧版本

新版本

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加