跳转到主内容

跳到这一步

Dominik Schnabelrauch编辑

编辑已通过 由 Dominik Schnabelrauch

之前
之后
不变

步骤行

+[* black] Use flat end of a spudger to pry up the EMI shield, starting from the top edge near the front-facing camera.
+ [* icon_note] In addition to screws and mild adhesive, the shield is also secured with clips along the outer edges. Try to bend the shield as little as possible when removing it, so you can bend it back to its original shape and re-use it. During reassembly, it should snap back into place once the screws are tightened.
+[* black] Continue carefully prying up the EMI shield until you can remove it.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加