跳转到主内容

跳到步骤#1

Adrian Szydlowski编辑

编辑已通过 由 Adrian Szydlowski

之前
之后
不变

步骤行

-[* black] Remove the plastic screw cover located on the bottom of the device. Insert a small flat-headed screwdriver into one side of the cover and gently ease it out. Repeat on the other side.
+[* red] Remove the plastic screw cover located on the bottom of the device. Insert a small flat-headed screwdriver into one side of the cover and gently ease it out. Repeat on the other side.
[* icon_note] Be gentle when removing the screw cover as it is brittle and will break if forced.
-[* red] You will need a #00 Phillips screwdriver to remove the two 2.6 mm screws that are exposed.
+[* orange] You will need a #00 Phillips screwdriver to remove the two 2.6 mm screws that are exposed.