跳转到主内容

跳到步骤#1

Geoff Wacker编辑

编辑已通过 由 Geoff Wacker

已删除
已添加
不变

步骤行

[* black] Remove the plastic screw cover located on the bottom of the device. Insert a small flat-headed screwdriver into one side of the cover and gently ease it out. Repeat on the other side.
[* icon_note] Be gentle when removing the screw cover as it is brittle and will break if forced.
[* icon_reminderred] You will need a #00 Phillips screwdriver to remove the two 2.6 mm screws that are exposed.
[* icon_reminderred] You will need a #00 Phillips screwdriver to remove the two 2.6 mm screws that are exposed.