跳转到主内容

跳到步骤#1

Destiney编辑

编辑已通过 由 Destiney

已删除
已添加
不变

步骤行

[* black] First, begin by removingremove the screw cover that is located on the bottom of the device. You will need to insertInsert a small flat-head screwdriver into one side of the screw cover and gently ease it out. Do the same to the other side until it's worked free.
[* black] First, begin by removingremove the screw cover that is located on the bottom of the device. You will need to insertInsert a small flat-head screwdriver into one side of the screw cover and gently ease it out. Do the same to the other side until it's worked free.
[* icon_caution] Be very gentle when removing the screw cover as it is a brittle piece of plastic that will break if forced.
[* red] Using a #00 Phillips screwdriver, remove the two 2.6 mm screws that are now exposed.