跳转到主内容

跳到步骤#1

Dan Bargas编辑

编辑已通过 由 Andrew Optimus Goldheart

已删除
已添加
不变

步骤行

[* black] RemoveFirst, begin by removing the screw cover that is located on the bottom of the Zune.
[* black] Stick
device. You will need to stick a small flat head screw driver inflat-head screwdriver into one side of the dock screw cover and gently ease it out. Do the same onto the other side until it's worked free.
[* icon_caution] This isBe very gentle when removing the cover as it's a brittle piece of plastic that will break if forced.
[* red] Using a small PhilipsPhillips screwdriver, remove the two 2.6mm2.6 mm screws that shouldare now be exposed.
[* black] RemoveFirst, begin by removing the screw cover that is located on the bottom of the Zune.
[* black] Stick
device. You will need to stick a small flat head screw driver inflat-head screwdriver into one side of the dock screw cover and gently ease it out. Do the same onto the other side until it's worked free.
[* icon_caution] This isBe very gentle when removing the cover as it's a brittle piece of plastic that will break if forced.
[* red] Using a small PhilipsPhillips screwdriver, remove the two 2.6mm2.6 mm screws that shouldare now be exposed.